The Shop Hacks Ultimate DIY Air Filtration System
Plans and Hardware
|
Plans $9.95
|
(optional) Pro Hardware Kit $19.95
|
This system outperformed 10 other systems by a wide margin.
Click the link below to download the test results
Click the link below to download the test results
| shop_hacks_air_filtration_system_shootout_tests_and_results.pdf |
- Avoid the fine layer of dust that covers everything in your shop (including your lungs)
- Why pay $1,000 for two Powermatic PM1200 units when you can build the equivalent yourself for under $200?
- Less Noise
- Less power consumption
- This system is effective in any position or orientation. Place it under a bench, hang it from the ceiling in the corner of your shop, set it on the floor. It will work well anywhere which gives you more flexibility.
Check out the test results below. Verified using a laser particle counter, the Shop Hacks Ultimate DIY Air Filtration System cleaned the air 3x faster than the Powermatic PM1200 and over 7x faster than the WEN 3410!
Test protocol: (measuring particles > 0.5 microns using a laser particle counter)
1. Cut MDF and melamine strips on a table saw until the particle counts exceed 1 million particles per cubic foot. Anything over 300,000 is very unhealthy. A healthy target is 30,000 and under.
2. Turn on the laser particle counter and the air filtration system then leave the room until the counts drop below 30,000 particles per cubic foot (the threshold for good air quality).
1. Cut MDF and melamine strips on a table saw until the particle counts exceed 1 million particles per cubic foot. Anything over 300,000 is very unhealthy. A healthy target is 30,000 and under.
2. Turn on the laser particle counter and the air filtration system then leave the room until the counts drop below 30,000 particles per cubic foot (the threshold for good air quality).
Purchase Options
$9.95
Plans - 29 pages with photos, illustrations, and a hyperlinked parts list
$24.95 which includes free shipping
Hardware kit ... save time and money and it will make your system look even more professional.
Hardware kit ... save time and money and it will make your system look even more professional.
Take your shop to the next level with cleaner air and less cleanup. This is a great looking system that will provide clean filtered air with the push of a button for years to come. The remote control power timer feature allows you to clean your air for 30 minutes up to 4 hours after leave.
